2011 - FMTÜ XVI. sz.

 

Recent Submissions

  • Tomkovics, Tamás; Kovács, László (Erdélyi Múzeum-Egyesület, 2011-03-16)
    Abstract There were several research and development activities in the recent past made by the Department of Materials Handling and Logistics of University of Miskolc about developing new automated systems. Planning these ...
  • Nagyné Halász, Erzsébet (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The development of the surface technology gave us many possibilities to make tools and samples. That’s mean we can use like bulk material some cheaper steels and the working surface have to be only hard and wear ...
  • Mucsi, András (Erdélyi Múzeum-Egyesület, 2011)
    Abstract This paper deals with the processing of differential scanning calorimetry measurements. It is necessary to correct this result in several cases. There is an example for the transformation kinetic calculated from ...
  • Fórián, Sándor (Erdélyi Múzeum-Egyesület, 2011)
    Abstract: The environment pollution caused by human activity has recently become global problem. The exorbitant appearance of the weather turning into extreme one, precipitations is the possible consequence of this. More ...
  • Marosvölgyi, Béla; Papp, Viktória (Erdélyi Múzeum-Egyesület, 2011)
    Abstract Due to an Europian Union engagement, we have to increase the proportion of renewable energies in Hungary. The percent of renewable energies should be 14,7% up to 2020. There are huge possilbilities in the biomass ...
  • Kuzsella, László (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The improvement of science and technology have emerged a high number of applications to change the structures and properties of almost all materials. Wood is not an exception either with new technologies to change ...
  • Ráczkövi, László (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The wear and tool life of tools applied to precision cutting have huge significance, because we perform the finishing of parts with expensive tool materials and the advantageous chip removal properties of these ...
  • Torkos, Zoltán (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The scope of this project is to further develop the Life Fitness high quality treadmill, for sport, medical-diagnostic, and special trainings analysis under loads (military, police, fireman, etc.) in that way, ...
  • Oláh, László Miklós; Gyenge, Csaba; Mészáros, Imre (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The rolling transmission wheels have variable pitch and variable screw profile surface section. In this paper is presented the screw geometric profile and machining technology. Machining with high precision turning ...
  • Medgyes, Krisztián (Erdélyi Múzeum-Egyesület, 2011)
    Abstract In my research I tried to find possible cost-effective alternatives for developing small business network environments in order to replace the currently almost exclusively used Microsoft Windows Server. During ...
  • Szűcs, András; Ádám, Balázs; Kapitány, Norbert (Erdélyi Múzeum-Egyesület, 2011)
    Abstract In this research we compounded the most widely used polymeric materials (PE, PP, PET) of the automotive and packaging industry. DSC measurements were carried out on the original and the compounded blends. There ...
  • Szűcs, András; Pósa, Márk (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The molten polymers are non-Newtonian materials because their viscosity apart from the temperature depends on the shear rate, pressure, the molecular weight, molecular weight distribution, flow geometry. The ...
  • Borka, Andrea; Hoffecker, Ákos; Kósa, Balázs; Lőke, Ferenc; Németh, István (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The essay describes in details the actual problems of Indóház square (railway station) in Pécs, and their solutions. This point of junction is not only significant to those who arrive on train, but with the buses ...
  • Szűcs, András; Tóth, Gergely (Erdélyi Múzeum-Egyesület, 2011)
    Abstract Different material properties were measured in order to do injection moulding simulation. The aim of our study was to determine their effect on the simulations. It was also our aim to find out the differences ...
  • Varga, Péter; Barányi, István; Kalácska, Gábor (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The roughness profile could be created by applying suitable filters to the measured profile. The standard defines the input parameters of the digital filters with the help of the general surface roughness. By ...
  • Csorba, Ádám (Erdélyi Múzeum-Egyesületet, 2011)
    Abstract The new data acquisition service using the airborne hyperspectral imaging system (AISA DUAL) and the ground-based spectroradiometer (ASD FieldSpec 3 MAX) offered by the Hyperspectral Working Group of the Hungarian ...
  • Tállai, Péter; Mózes, András (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The aim of our researches was to find an answer to the question: what are the differences between the different types of ISCAR’s Co. end mill cutters. In order to compare the tools in a better way, they have been ...
  • Nagy, Gábor Lajos; Dezső, Gergely (Erdélyi Múzeum-Egyesület, 2011)
    Abstract A team of students involved in the „Robots and CNC machines” talent management project at the Department of Production engineering at College of Nyíregyháza, designed and made a packaging line from prefabricated ...
  • Drégelyi-Kiss, Ágota; Németh, Emil (Erdélyi Múzeum-Egyesület, 2011)
    Abstract The first step of manufacturing of disc brake pads in trucks is the pressing of brake pad carrier on the base sheet. The process is technologically strictly supervised by the parameters such as press load, ...
  • Turi, Tamás; Horváth, Magdolna (Erdélyi Múzeum-Egyesület, 2011)
    Abstract Providing equal access to the environment not only improves the living conditions of disabled persons, but the elderly, the sick, the people using everyday stroller much easier. The barrier-free environment and ...

View more