2006 - FMTÜ XI. sz.

 

Recent Submissions

  • Zádor, István; Falvy, Bence; Horváth, Dániel; Vajda, István (Erdélyi Múzeum-Egyesület, 2006)
    Abstract During the development of both commercial and utility vehicles, the need for extension of built-in electronic functionalities is gaining ground. Such systems are: ABS, ASR, „drive-by-wire” or an ESP system, which ...
  • Róth, Sándor (Erdélyi Múzeum-Egyesület, 2006)
    Summary Sheet metals for deep-drawing process must ensure good formability. To know this property of metal sheets is very important to decide wether the product can be processed or not. The dates given by the sheet metal ...
  • Molnár, Gyula; Kovács, Tünde; Nagyné Halász, Erzsébet (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Wear, as known in common, is defined as a progressive material loss from a surface as a result of relative motion between two or more surfaces, has long been a subject of practical interest, yet until recently ...
  • Tarczal, Lajos (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The PMK-2 facility - a scaled-down model of the Paks Nuclear Power Plant equipped with VVER440/213-type reactors - originally was designed for investigating loss of coolant accidents (LOCA) and to supply experimental ...
  • Bákai, Tamá (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Nowadays the growing demands are the dominant concept of most parts of life. To satisfy these demands the planning of more complex and flexible problem-solving systems are required. In the last decades many new ...
  • Pinke, Péter; Réger, Mihály; Marcinka, Roderik (Erdélyi Múzeum-Egyesület, 2006)
    Abstract This paper deals with the changes in the microstructure of the casted Ti6Al4V titanium alloy by a solution treatment at 1050 oC, 950 oC and 800 oC followed by water or air cooling. The specimens after solution ...
  • Lengyel, Antal; Szegedi, Attila (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Because of the agricultural requirements, the tractors need lot of gears in order to reach the ideal hyperbole of traction power. The tractors must excent huge forces inside a narrow velocity range. The large ...
  • Pótári, Tamás (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The title of our project is Virtual Protoboard. Our aim is to make virtual software for designing logical electric circuit. By means of this software students can acquire the basis of digital networking. Furthermore, ...
  • Balajti, Zsuzsanna; Dudás, Illés (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The aim of the paper and the PhD dissertation (Zsuzsanna Balajti Óvári: Productional examination of kinematic driving pairs) to show a new model which is suitable for neglecting the errors of the other. Össz ...
  • Szilágyi, Sándor Miklós; Görög, Levente Károly; László, Sándor Elek (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Several type of heart malfunctions are usually caused by heart attack, rhythm disturbances and pathological degenerations. Unfortunately large groups of people are affected by this problem. The main goal of this ...
  • Zörgő, Zoltán (Erdélyi Múzeum-Egyesület, 2006)
    Summary If we wish to achieve high performance and efficient data manipulation using database management systems which implements an existing model, data modeling is a necessary and inevitable task. Hie-rarchical, network, ...
  • Szabó, Ottó (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Finishing procedures (grinding, honing, etc.) determine the working properties of parts. The accuracy and surface roughness that can be attained by grinding and honing ara determined by numerous factors. For ...
  • Lévai, Imre; Nándoriné Tóth, Mária (Erdélyi Múzeum-Egyesület, 2006)
    Abstract In this paper we deal with a special case of drives with no intersection of the axis. That is with geometric planning and analysis of connection of cylindrical warm and double internal ring wheel. Analysis has ...
  • László, Sándor Elek; Szilágyi, Sándor Miklós (Erdélyi Múzeum-Egyesület, 2006)
    Abstract This Paper presents processing methods of MRI data. The program useshe raw data to create a 3D object on wich we analize each point to decide if belongs to the entity. For this purpose I developed some methods ...
  • Torkos, Zoltán (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The product design for environment in our day’s give a permanent challenge for design engineers in new products design because they need to satisfied the low cost wants without losing the functionality and hi ...
  • Mende, Tamás; Roósz, András (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Using of the ESTPHAD (Estimation of Phase Diagrams) method the liquidus, solidus, major and minor curves and surfaces of the equilibrium phase diagrams can be created –by thermodinamic based equations and regression ...
  • Szabó P., Balázs (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The kernel hardness is a very important parameter and the kernel hardness is a significant characteristic. In the last decade the wheat commercial trading is more important (soft and hard grain varieties). The ...
  • Szűcs, András; Szabó, Ferenc; Pósa, Márk (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The latest development in injection moulding technology is the introduction of pressure sensors in the cavity. The measured pressure value controls the machine, therefore the technology becomes more reliable. In ...
  • Puskás, Nikoletta (Erdélyi Múzeum-Egyesület, 2006)
    Abstract Glazing is suited to make better the surface properties of ceramic products. The developed coating has to suit several requirements. The cohesion of the glaze to the substrate and the transitional layer is the ...
  • Bálint, Péter (Erdélyi Múzeum-Egyesület, 2006)
    Abstract The point of new production technology of miniature car-lamps is to change the glass of the stand from EMGO unleaded glass to magnesia glass. The dumet coated with 10 – 100 microns unleaded glass and this coated ...

View more