2008 - FMTÜ XIII. sz.

 

Recent Submissions

  • Bankos, Szilvia; Nagyné Halász, Erzsébet (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Materials engineering is concerned with the application of knowledge relating the composition, structure and processing of materials their properties and uses. Engineers adapt materials to society’s needs, that ...
  • Balogh, Emőke; Boldoczki, D.; Hegedűs, Attila; Papp, J.; Sipos, B.; Stefanovitsné Bányai, Éva (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The last decade has witnessed an ever-increasing interest in a healthy diet in Hungary. Our experiments were carried out on the products, like syrup, sauce, jam, processed from berries including strawberry (Fragaria ...
  • Baki-Hari, Zoltán-Gábor (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Nowadays we often encounter different or even strange applications of the Rapid Prototyping Technologies (RPT). This is due to the today familiar and used realization procedures, and materials used by this, ...
  • Újsághy, Zsófia (Erdélyi Múzeum-Egyesület, 2008)
    Abstract In the last few decades the number of vehicles on the roads increased in a great extent and not surprisingly also the number of car wrecks increased simultaneously. These wrecks representing a significant gross ...
  • Bak, Árpád (Erdélyi Múzeum-Egyesület, 2008)
    Astract In this paper some successful technical development of the XIX. century are examined in the aspect of modern innovative theories. The aim is to find those important peculiarities which might be able to give a good ...
  • Tóth, Enikő; Illés, Béla (Erdélyi Múzeum-Egyesület, 2008)
    Abstract In recent years automatic identification procedures (Auto ID) have become very popular in many service industries, purchasing and distribution logistics, industry, manufacturing companies and material flow systems. ...
  • Tamás, Levente; Lazea, Gheorghe (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The presented topic deals with measurment used in navigation systems such as odiometric, infrared or ultrasonic. The first part of the paper presents these measurement systems such as the odometic, ultrasonic and ...
  • Szűcs, Nóra (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The main objective of the present paper is to establish the fundamental solutions for a thin plate assuming a constant in plane stress state due to the loads applied in the middle plane of the plate. Összefoglalás A ...
  • Szűcs, András (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Injection moulding is one of the most widely used techniques producing complex final product in one manufacturing step. Maintaining and improving of the quality of the plastic product requires detailed knowledge ...
  • Szilágyi, Arnold (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The subject of this paper is the presentation of a unusual method and its usability designing a machine, which gives the opportunity for specialists to have an insight upon the behaviour of a mechanism which is ...
  • Szabó, Gergely (Erdélyi Múzeum-Egyesület, 2008)
    Abstract To increase the wear resistance of parts it is needed to increase their surface hardness and the number of their hard surfaces. For a long time hard surfaces were machined by abrasive, grinding processes. Today ...
  • Szabó, Bálint (Erdélyi Múzeum-Egyesület, 2008)
    Abstract This article is about vehicle model development for a special case of vehicle manoeuvres, the parking. The vehicle model development started in two directions: kinematical and dynamical model design. To increase ...
  • Szabados, Gábor; Németh, János (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The paper introduced the ideas of the possibility of fuzzy controlled contorol systems of car park systems. Összefoglalás A cikk bemutatja az automatikus parkolóházak vezérlésének fuzzy alapú irányítási lehetőségeit.
  • Sebők, Gergely (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The tracking system is a wery importan part of the rail cars, it ensures the safety run. The components of the tracking system are: a pair of wheels rigidly mounted on an axle. The first wheels where made of ...
  • Salamon, Gábor (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The design process of telecommunication networks often uses graph theory as an efficient modeling paradigm. The nodes and possible links of the network are represented by a graph G. When a connected network is ...
  • Bagyinszki, Gyula; Bitay, Enikő (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Surface treatments belong to the most important property-modification and composite-forming techniques carried out for many years, almost since the beginning of the 20th century. In this paper we give a survey ...
  • Réti, Tamás; Bitay, Enikő (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Combinatorial properties of fullerenes are investigated. Starting with the traditional spiral code, novel topological shape indices are introduced for the structural characterization of fullerenes. It is demonstrated ...
  • Réger, Mihály; Heli, Kytönen; Verő, Balázs; Szélig, Árpád (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Industrial data set with 400 CC steel slabs were analysed by statistical method for revealing the real connections between the technological parameters, heat transfer model’s results and the precisely determined ...
  • Pinke, Péter (Erdélyi Múzeum-Egyesület, 2008)
    Abstract The microstructure of nickel based superalloys prepared by directional solidification is dendritic. This paper depicts the influence of the heat treatment process on the microstructure of CMSX-3 nickel based ...
  • Pézsa, Nikolett (Erdélyi Múzeum-Egyesület, 2008)
    Abstract Climate change is one of the biggest challenges nowadays. There is evidence that global warming is strongly related to human activity. CO2 emission is one of the major factors determining climate change. The ...

View more